T-Shaped Glass-to-Glass Railing Clamp

T-Shaped Glass-to-Glass Railing Clamp

Model: RCG-200

The RCG-200 T-Shaped Glass-to-Glass Railing Clamp joins frameless glass panels where they meet at a 90° T-junction, letting a straight run continue through while a third panel branches off at a right angle, with no post required. Made from marine-grade 316 stainless steel, it holds 10 mm (3/8") and 12 mm (1/2") tempered glass securely in both interior and exterior settings, including pool enclosures, balconies, decks and coastal properties where corrosion resistance matters most.

Many T-junction clamps are solid-brass shower hardware that need holes drilled in the glass. The RCG-200 is built for railing and fencing instead: its three slim channels clamp directly onto the glass edges with gaskets and side set screws, so no glass cut-outs are needed and panels can be fine-tuned on site. By tying the panels together, it also helps reinforce and straighten the run, keeping top edges aligned. Square edges and a low-profile body match the FMF Slim Series 90°, 180° and adjustable connectors for a consistent, minimal look across the whole railing.

Key Features

• T-Junction Connection: Joins two or three glass panels at a 90° T-intersection: one continuous run plus a perpendicular branch.
• No Glass Cut-Outs: Clamps onto the glass edge with gaskets, so no drilling or notching is required.
• Glass Stiffening: Ties panels together to reinforce the run and help keep the glass straight and aligned.
• Marine-Grade 316 Stainless Steel: Superior corrosion resistance for pool, coastal and other exterior environments.
• Glass Compatibility: Fits 10 mm (3/8") and 12 mm (1/2") tempered glass.
• Secure Set-Screw Fixing: Side set screws clamp each panel firmly and evenly.
• Slim Series Profile: Square edges and a low-profile body match FMF Slim Series glass connectors.
• Indoor & Outdoor Use: Suitable for residential and commercial projects, inside or out.
• 5-Year Warranty: Backed by a limited 5-year manufacturer warranty.

Specifications

• Model: RCG-200
• Product Type: Glass-to-glass railing connector
• Configuration: 3-way, 90° T-junction
• Material: 316 Grade Stainless Steel
• Glass Compatibility: 10 mm (3/8") and 12 mm (1/2") tempered glass
• Glass Fabrication: None required
• Fixing Method: Side set screws with gaskets
• Application: Glass railings, pool fencing, balcony and deck guards, partitions, windbreaks and mezzanine barriers
• Indoor / Outdoor Use: Yes
• Warranty: Limited 5-Year Warranty

Available Finishes

• Brushed Stainless (RCG-200.SS)
• Matte Black (RCG-200.BL)

Kit Contents

• 1 × T-Shaped Glass-to-Glass Railing Clamp
• Set screws
• Gaskets for 10 mm and 12 mm glass

Installation & Support

Position the clamp at the panel junction and fit the gaskets for your glass thickness. Slide each panel fully into its channel, check that the panels are plumb and in line, then tighten the set screws evenly until the glass is held firmly. Do not overtighten. Use tempered glass only, and always follow local building codes for guard height and load requirements; consult a qualified professional for structural applications. Pair with FMF Slim Series 90° and 180° Glass-to-Glass clamps to complete corners and straight runs. For product questions, installation guidance or project support, contact the FMF Glass Hardware Inc. team.