Hydraulic Bottom Patch Hinge – 150 kg Heavy Duty, 90° Hold Open

Hydraulic Bottom Patch Hinge – 150 kg Heavy Duty, 90° Hold Open
Model: HYP-150

The FMF Heavy Duty Hydraulic Bottom Patch Hinge carries frameless glass doors up to 150 kg (330 lb) and 39" wide. It clamps onto the bottom corner of the glass and gives a self-closing door with a 90° hold-open, so there is no floor closer to dig in and no visible overhead closer.

It fits 10 mm (3/8") and 12 mm (1/2") tempered glass, with an aluminum body and 304 stainless steel cover plate. All the hardware, gaskets and an Allen wrench are included, along with a glass cut-out diagram for your fabricator. For interior use only, in homes, offices and light commercial spaces.

Key Features

• Self-Closing: Returns the door gently to the closed position.
• 90° Hold Open: Holds the door open at 90° until it is pushed closed.
• Adjustable Closing Speed: Set the swing speed to suit the door and the space.
• No Floor Digging: Mounts on the glass, with no floor closer to cut in.
• Fits 10–12 mm Glass: For 10 mm or 12 mm tempered glass; gaskets for 10 mm glass included.
• 150 kg Capacity: For doors up to 150 kg (330 lb) and 39" wide.
• Interior Use Only: Designed for indoor glass doors.
• Finish Options: Brushed Stainless, Matte Black, Polished Stainless or Satin Brass.

Specifications

• Product Type: Hydraulic bottom patch hinge
• Model: HYP-150
• Function: Self-closing, holds open at 90°, adjustable closing speed
• Maximum Door Weight: 150 kg (330 lb)
• Maximum Door Width: 39"
• Glass: 10 mm (3/8") or 12 mm (1/2") tempered
• Material: Aluminum body with 304 stainless steel cover plate
• Glass Cut-Out: Required; see the glass fabrication diagram
• Shipping Weight: 6 lb (2.7 kg)
• Use: Interior only, residential and commercial
• Warranty: Limited 1-year warranty

Available Finishes

• Brushed Stainless
• Matte Black
• Polished Stainless
• Satin Brass

Kit Contents

• 1 × hydraulic bottom patch hinge
• Screws and bolts
• Gaskets for 10 mm glass
• Allen wrench
• Glass fabrication (cut-out) diagram
• Installation instruction sheet

Installation & Support

• Ease of Installation: Mounts on the glass with no floor digging; fit the gaskets, then tighten the patch onto the glass.
• Glass Fabrication: The glass needs a corner cut-out; send the included fabrication diagram to your glass supplier.
• Application: Interior frameless glass doors for offices, washrooms, entrances and partitions.
• Compatible Accessories: FMF PAT-02 top patch fitting and PAT-PIN pivot pin (or a complete patch door kit), glass door locks and pull handles, sold separately.
• Warranty: Backed by FMF’s limited 1-year warranty.
• Shipping: Ships via third-party courier service.